1. Auto Stirrup machine straightening system:
The particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with pulling roller that eliminate the torsion with patent mechanism, which is driven by servomotor, thus ensuring a perfect straightening accuracy.
2. Auto Stirrup machine cut and bend mechanism:
The 「bending」 and 「cutting」 unit, driven by servomotor, is equipped with turning and retractile bending pins. After received a signal from computer, the cutting unit starts and cut reinforcement steel in the twinkling, guaranteed the tolerance of the stirrup.
3. Auto Stirrup machine feeding system :
The feeding system from coil of this mode, for single or double strand (deformed bar/reinforcement steel/rebar), by means of two motorized and braked pay-off, is controlled by computer to adjust the feeding speed. A particular patented designed spring unit with each pay-off can reduce the resistance and instability.
3. Auto Stirrup machine control system :
For this CNC stirrup bender, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.
A stirrup available to the most 30bends; 500 different stirrups parameter can be stored in the computer memory and also can be automatically recalled and used according to the wire to be processed, which will be rational displayed on the screen.
The machine needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.
With self-diagnosis, there are two standard exit (RS232/RS422), throng which the electric encoder can be joined.
Diameters with single strand
Diameters with double strand
Max & Min length of the stirrup side
Max bending angle
Max puling speed
Max bending speed
Labelled electric power
15噸 / 10小時 (一名工人)
PLC with 14" Touch pannel
Error message automatic detection