DH-FW60 Rebar Friction Welding Machine

1. Unique welding function
   The welding surface is welded to the two end faces of the metal, and the joint has strong toughness.
   Its tensile and torsional strength far exceeds the strength of arc welding and argon welding.
2. Adding dissimilar materials can reduce material costs
   Metal combinations that are not compatible with conventional welding can be joined by friction welding.
   It can save a lot of cost and is an application method of lightweight components.
3. Improve welding accuracy
   After welding, the materials at both ends are not easily deformed, and the center eccentricity is within 0.5m/m.
   Ensuring the quality of the workpiece reduces machining allowances and reduces material and processing costs.
4. Eco-friendly and energy efficient
   Do not use materials or fillers such as metal, flux, gas, etc.
   Uniform heat, no arc or toxic, can effectively improve the working environment.
5. Faster and more accurate welding efficiency
   The production cost of using friction welding is lower than that of forging, and it can be formed quickly.
   Its strength is no less than that of forged products, and the surface is cleaner.
6. Can eliminate manual welding errors
   The machine-controlled friction welding process is consistent and repeatable, eliminating human error.
   At the same time, it produces independent and higher than the operator's technical level of welding quality.

The welding surface is melted together at both ends of the metal, and the connecting point is strong and tough, and the strength of tensile and torsional resistance far exceeds the strength of arc welding and argon welding.

1. Dissimilar materials can be welded together, For example, the stainless steel material can be welded with ordinary iron materials with various medium and high carbon steel materials, However,Require annealing after completed welding high carbon steel.
2. After welding, the materials at both ends are not easily deformed, Center eccentricity difference within 0.5m/m,To ensure the quality of the work piece can reduce the processing reservation,Can reduce materials and processing costs
3. The cost of production using friction welding is lower than that of forging, also It can be formed quickly. However, the strength is not less than of forged products, and the surface is cleaner.
4. It does not require the use of expendable materials such as fuels or metal-filled solvents, gases, etc., and generates uniform heat with friction between the contact surfaces, so there is no arc or toxic material to improve the working environment.

Stable operation without being subjected to oil temperature. High-precision weld is possible. Angle control expands the range of the application of friction welding such as to phase adjusting workpiece. Servo control reduces more carbon dioxide emissions than hydraulic control dose. Better energy-saver. No oil leakage >>> Improved working environment. No waste oil >>> Environment-friendly. Feedback control of forge force enables smooth drive at low speed range. Uniform output under any conditions (temperature, humidity and so on) Downsized hydraulic unit >>> Space-saving and low noise.

Advantages of this friction welding machine

1. Using the latest servo drive, the shift is more accurate
2. Free and fast moving shift speed
3. Does not affect the oil temperature
4. Full touch panel can be flexible and flexible, with high degree of freedom
5. Can be attached with cutting device, automatic cutting waste
6. Using well-known brand parts from all countries, accurate accuracy
7. 5 times faster than traditional car shaping
8. Fully automated production, increased production and reduced manpower